Have you ever wondered what the most cost-effective printing is?

These prices are for a large nation wide large format print service used by Architects & engineers- so for this case… Keeping in mind that the sheet needs to fit the building (larger buildings on smaller sheets will require more sheets…); the 11x17 is less than half the cost of the 15x21.

Cost Breakdown



Cost



Width
Height

Sqft
Typical
Typ. Cost/Sqft

1st set*
22
34

0.11
$0.72
$0.360

$1.50
11
17

0.01
$0.15
$0.075

-
30
42

0.23
$1.08
$0.540

$2.25
15
21
*
0.04
$0.36
$0.180

$0.75
36
48

0.36
$1.44
$0.720

$3.00
18
24

0.05
$0.36
$0.180

$0.75
*Preprint cost is for initial setup and review of drawing set prior to printing multiple sets.





**15x21 must be printed on a 22" roll.









SqFt

Cost/SqFt


Cost of 11x17 compared to 15x21


31%

42%






Comments

Post a Comment

Popular posts from this blog

Powerpoint countdown and current time in slides VBA

Add text fields- this VBA searches through the objects in the first frame until it finds " " in the text some where, truncates everything from and to the right and replaces it with an active countdown timer or current time in the box. Refreshes every 500ms with a prtsafe call so it doesn't bog down the CPU. Add a slide advance to start the next slide and begin automated slide advancement. Attribute VB_Name = "Countdown" Private Declare PtrSafe Function WaitMessage Lib "user32" () As Long Public Sub Wait ( Seconds As Double ) ''non cpu-intensive wait timer '' https://stackoverflow.com/questions/57268161/sleep-wait-timer-in-powerpoint-vba-thats-not-cpu-intensive Dim endtime As Double endtime = DateTime.Timer + Seconds Do WaitMessage DoEvents Loop While DateTime.Timer < endtime End Sub Sub Countdown_from_Start () Dim Time As Date Dim Count As ...
Read more

Revit area plans adding new types and references (Gross and rentable)

Image
Note to self: Add additional (duplicate) gross area and net area schemed under Area Plans And Area schemes... Really counter-intuitive place to put this instead of say...  Area Plans> New Type> Edit Type (ADD) or Create an area plan, then Go to Properties, Edit Type and Duplicate... Always seem to forget this one! 2015-10-16-And for the calculation type... To update: this also applies to Revit as well as LT- The gross calculations cannot be overridden, however the 'rentable' comes in various flavors... From AD Revit help: Applies to Revit LT 2015 Rules are determined by one type of space bordering another space. The following table shows area measurement rules. To find the appropriate measurement rule, find the selected Area Type and the corresponding Bordering Area Type. Gross Building Area Scheme Types Gross Building Area Scheme Types Area Type Selected Bordering Area Type Measurement Rule Gross Building Area Gross Buil...
Read more